Our Services
Take a look at my previous work! More examples available upon request.
Above is a Move bumper kit that I welding together and mounted for the front and rear bumper on this truck. All done with what is called a tombstone welding SMAW welding machine or as I call them, a buzz box.
The weld above is an inch thick plate welded on to an I beam using pulse MIG.
This is the top of a tube that two welds meet which connect the tube to a large cylinder using GMAW also known as MIG.
The image shown is before and after a repair on a forklift mast that had been cracked and broken for quite some time so I cleaned up the break, beveled the two edges, put a backing strip under the gap, and filled it with 7018 SMAW.
This is a quick horse trailer repair on the pin and pin bracket. I cut the old one off , ground down the remaining material while also cleaning the rest of the metal, centered it and made sure the pin reached all the way through, then tacked and welded it uphill using SMAW 7018 uphill.
Contact us
Interested in working together? Fill out some info and we will be in touch shortly. We can’t wait to hear from you!